Static Multicast Ip - TP-Link TL-SG2424P User Manual

VLAN ID:
Port:
Type:
Multicast IP Table

Multicast IP:
VLAN ID:
Forward Port:
Type:
Note:
If the configuration on VLAN Config page and multicast VLAN page is changed, the switch will
clear up the dynamic multicast addresses in multicast address table and learn new addresses.

8.2.2 Static Multicast IP

Static Multicast IP table, isolated from dynamic multicast group and multicast filter, is not learned
by IGMP Snooping. It can enhance the quality and security for information transmission in some
fixed multicast groups.
Choose the menu Multicast→Multicast IP→Static Multicast IP to load the following page.
The following entries are displayed on this screen:
Create Static Multicast

Multicast IP:
Enter the VLAN ID the desired entry must carry.
Select the port number the desired entry must carry.
Select the type the desired entry must carry.
All: Displays all multicast IP entries.

Static: Displays all static multicast IP entries.

Dynamic: Displays all dynamic multicast IP entries.

Displays multicast IP address.
Displays the VLAN ID of the multicast group.
Displays the forward port of the multicast group.
Displays the type of the multicast IP.
Figure 8-9 Static Multicast IP Table
Enter static multicast IP address.
94