Snmp User - TP-Link TL-SG2424P User Manual

Write View:
Notify View:
Group Table

Select:
Group Name:
Security Model:
Security Level:
Read View:
Write View:
Notify View:
Operation:
Note:
Every Group should contain a Read View. The default Read View is viewDefault.

11.1.4 SNMP User

The User in a SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Choose the menu SNMP→SNMP Config→SNMP User to load the following page.
Select the View to be the Write View. The management access
is writing only and changes can be made to the assigned
SNMP View. The View defined both as the Read View and the
Write View can be read and modified.
Select the View to be the Notify View. The management station
can receive trap messages of the assigned SNMP view
generated by the switch's SNMP agent.
Select the desired entry to delete the corresponding group. It is
multi-optional.
Displays the Group Name here.
Displays the Security Model of the group.
Displays the Security Level of the group.
Displays the Read View name in the entry.
Displays the Write View name in the entry.
Displays the Notify View name in the entry.
Click the Edit button to modify the Views in the entry and click
the Modify button to apply.
127