C
H A P T E R
13.1 Overview
The P-792H v2 usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-792H v2 send data to devices
not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-792H v2's
LAN interface. The P-792H v2 routes most traffic from A to the Internet through
the P-792H v2's default gateway (R1). You create one static route to connect to
services offered by your ISP behind router R2. You create another static route to
communicate with a separate network behind a router R3 connected to the LAN.
Figure 85 Example of Static Routing Topology
A
R3
P-792H v2 User's Guide
LAN
WAN
13
Static Route
R1
R2
187