Address Mapping Sets - ZyXEL Communications P-792H User Manual

Chapter 30 NAT Setup
A server set is a list of LAN servers mapped to external ports. To use this set, a
server rule must be set up inside the NAT address mapping set. Please see the
section on port forwarding in
these menus. To configure NAT, enter 15 from the main menu to bring up the
following screen.
Figure 155 Menu 15: NAT Setup

30.2.1 Address Mapping Sets

Enter 1 to bring up Menu 15.1.1 - Address Mapping Sets.
Figure 156 Menu 15.1: Address Mapping Sets
Select the address mapping set you want to modify. The fields in address 255 are
used for SUA and are read-only.
324
Section 8.3 on page 104
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Menu 15.1 - Address Mapping Sets
1. ACL Default Set
2.
3.
4.
5.
6.
7.
8.
255. SUA (read only)
for further information on
P-792H v2 User's Guide