ZyXEL Communications P-792H User Manual page 34

Chapter 2 Introducing the Web Configurator
Table 3 Navigation Panel Summary
LINK
Static
Route
802.1Q/1P
QoS
Dynamic
DNS
Remote
MGMT
UPnP
Maintenance
System
Logs
34
TAB FUNCTION
Static Route Use this screen to configure IP static routes to tell your
P-792H v2 about networks beyond the directly
connected remote nodes.
Group Setting Use this screen to activate 802.1Q/1P, specify the
management VLAN group, display the VLAN groups
and configure the settings for each VLAN group.
Port Setting Use this screen to configure the PVID and assign traffic
priority for each port.
General Use this screen to enable QoS and traffic prioritizing,
and configure bandwidth management on the WAN.
Class Setup Use this screen to define a classifier.
Monitor Use this screen to view each queue's statistics.
Dynamic DNS This screen allows you to use a static hostname alias
for a dynamic IP address.
WWW Use this screen to configure through which interface(s)
and from which IP address(es) users can use HTTPS or
HTTP to manage the P-792H v2.
Telnet Use this screen to configure through which interface(s)
and from which IP address(es) users can use Telnet to
manage the P-792H v2.
FTP Use this screen to configure through which interface(s)
and from which IP address(es) users can use FTP to
access the P-792H v2.
SNMP Use this screen to configure your P-792H v2's settings
for Simple Network Management Protocol
management.
DNS Use this screen to configure through which interface(s)
and from which IP address(es) users can send DNS
queries to the P-792H v2.
ICMP Use this screen to set whether or not your P-792H v2
will respond to pings and probes for services that you
have not made available.
General Use this screen to turn UPnP on or off.
General Use this screen to configure your P-792H v2's name,
domain name, management inactivity timeout and
password.
Time Setting Use this screen to change your P-792H v2's time and
date.
View Log Use this screen to display your P-792H v2's logs.
Log Settings Use this screen to select which logs and/or immediate
alerts your P-792H v2 is to record. You can also set it
to e-mail the logs to you.
P-792H v2 User's Guide