ZyXEL Communications P-792H User Manual page 108

Chapter 8 Network Address Translation (NAT)
To change your P-792H v2's address mapping settings, click Network > NAT >
Address Mapping to open the following screen.
Figure 44 Network > NAT > Address Mapping
The following table describes the fields in this screen.
Table 26 Network > NAT > Address Mapping
LABEL
#
Local Start IP
Local End IP
Global Start
IP
Global End IP
108
DESCRIPTION
This is the rule index number.
This is the starting Inside Local IP Address (ILA). Local IP addresses are
N/A for Server port mapping.
This is the end Inside Local IP Address (ILA). If the rule is for all local IP
addresses, then this field displays 0.0.0.0 as the Local Start IP address
and 255.255.255.255 as the Local End IP address. This field is N/A for
One-to-one and Server mapping types.
This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if
you have a dynamic IP address from your ISP. You can only do this for
Many-to-One and Server mapping types.
This is the ending Inside Global IP Address (IGA). This field is N/A for
One-to-one, Many-to-One and Server mapping types.
P-792H v2 User's Guide