ZyXEL Communications P-792H User Manual page 50

Chapter 4 Internet Setup Wizard
The following table describes the fields in this screen.
Table 10 Internet Connection with ENET ENCAP
LABEL
Obtain an IP
Address
Automatically
Static IP
Address
IP Address
Subnet Mask
Gateway IP
address
First DNS
Server
Second DNS
Server
Back
Apply
Exit
Figure 20 Internet Connection with PPPoA
50
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP
address.
Select Static IP Address if your ISP gave you an IP address to use.
Enter your ISP assigned IP address.
Enter a subnet mask in dotted decimal notation.
Refer to the appendix to calculate a subnet mask If you are implementing
subnetting.
You must specify a gateway IP address (supplied by your ISP) when you
use ENET ENCAP in the Encapsulation field in the previous screen.
Enter the IP addresses of the DNS servers. The DNS servers are passed to
the DHCP clients along with the IP address and the subnet mask.
As above.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to close the wizard screen without saving.
P-792H v2 User's Guide