Example Xmodem Configuration Upload Using Hyperterminal - ZyXEL Communications P-792H User Manual

Chapter 35 Firmware and Configuration File Maintenance
After the "Starting Xmodem upload" message appears, activate the Xmodem
2
protocol on your computer. Follow the procedure as shown previously for the
HyperTerminal program. The procedure for other serial communications programs
should be similar.
Enter "atgo" to restart the P-792H v2.
3
35.5.11 Example Xmodem Configuration Upload Using
HyperTerminal
Click Transfer, then Send File to display the following screen.
Figure 216 Example Xmodem Upload
After the configuration upload process has completed, restart the P-792H v2 by
entering "atgo".
384
P-792H v2 User's Guide