ZyWALL 5/35/70 Series User's Guide
Figure 184 SECURITY > VPN > SA Monitor
The following table describes the labels in this screen.
Table 100 SECURITY > VPN > SA Monitor
LABEL
#
Name
Local Network
Remote Network
Encapsulation
IPSec Algorithm
Refresh
Disconnect
18.13 VPN Global Setting
Click SECURITY > VPN > Global Setting to open the VPN Global Setting screen. Use this
screen to change settings that apply to all of your VPN tunnels.
354
DESCRIPTION
This is the security association index number.
This field displays the identification name for this VPN policy.
This field displays the IP address of the computer using the VPN IPSec feature of
your ZyWALL.
This field displays IP address (in a range) of computers on the remote network
behind the remote IPSec router.
This field displays Tunnel or Transport mode.
This field displays the security protocols used for an SA.
Both AH and ESP increase ZyWALL processing requirements and
communications latency (delay).
Click Refresh to display the current active VPN connection(s).
Select a security association index number that you want to disconnect and then
click Disconnect.
Chapter 18 IPSec VPN