Port Triggering Add - ZyXEL Communications P-663HN-51 User Manual

The following table describes the labels in this screen.
Table 25 Advanced Setup > NAT > Port Triggering
LABEL
Add
Remove
Application
Trigger
Open

7.5 Port Triggering Add

Click Advanced Setup > NAT > Port Triggering > Add to open the following
screen. Use this screen to change your ZyXEL Device's trigger port settings.
Figure 40 Advanced Setup > NAT > Port Triggering > Add
P-663HN-51 User's Guide
Chapter 7 Network Address Translation (NAT) Screens
DESCRIPTION
Click this button to go to a screen where you can configure a new entry.
To remove an entry(ies), select its Remove check box and click the
Remove button.
Name for identification purposes.
The trigger port is a protocol and port (or a range of ports) that causes (or
triggers) the ZyXEL Device to record the IP address of the LAN computer
that sent the traffic to a server on the WAN.
Open is a port (or a range of ports) that a server on the WAN uses when it
sends out a particular service. The ZyXEL Device forwards the traffic with
this port (or range of ports) to the client computer on the LAN that
requested the service.
89