Wireless Station Info - ZyXEL Communications P-663HN-51 User Manual

Table 58 Wireless LAN > Advanced Setup
LABEL
WMM APSD
Apply
Reset

18.9 Wireless Station Info

The station monitor displays the connection status of the wireless clients
connected to (or trying to connect to) the ZyXEL Device. To open the station
monitor, click Wireless > Station Info. The screen appears as shown.
Figure 77 Wireless > Station Info
The following table describes the labels in this menu.
Table 59 Wireless > Station Info
LABEL
MAC
Address
Associated
Authorized
Strength
SSID
Interface
Refresh
P-663HN-51 User's Guide
DESCRIPTION
When using WMM, enable APSD (Automatic Power Save Delivery) to
have the ZyXEL Device manage radio usage to help increase battery
life for battery-powered wireless clients. APSD uses a longer beacon
interval when transmitting traffic that does not require a short packet
exchange interval. For example, web browsing or using e-mail does
not require a short packet exchange interval but Voice Over IP (VoIP)
does. The wireless client must also support APSD for there to be any
affect on the battery life.
Click this to save your changes back to the ZyXEL Device.
Click this to reload the previous configuration for this screen.
DESCRIPTION
This displays the MAC address (in XX:XX:XX:XX:XX:XX format) of a
connected wireless station.
This is the time that the wireless client associated with the ZyXEL Device.
This is the time that the wireless client's connection to the ZyXEL Device was
authorized.
This displays the strength of the wireless client's radio signal. The signal
strength mainly depends on the antenna output power and the wireless
client's distance from the ZyXEL Device.
This is the name of the wireless network on the ZyXEL Device to which the
wireless client is connected.
This is the name of the wireless LAN interface on the ZyXEL Device to which
the wireless client is connected.
Click this button to update the information in the screen.
Chapter 18 Wireless LAN
159