Initial Configuration; Wan Configuration - ZyXEL Communications P-663HN-51 User Manual

C
H A P T E R
This chapter introduces the initial configuration that you may need to perform on
the ZyXEL Device.

3.1 WAN Configuration

If you connect your ZyXEL Device and are able to access the Internet without
configuring the ZyXEL Device, it may be that your ISP pre-configured the ZyXEL
Device for you or the Internet connection works with the ZyXEL Device's default
settings.
If you connect the ZyXEL Device and are not able to access the Internet, the ISP
(Internet Service Provider) should have given you Internet connection
information. This includes the connection type, VPI, VCI, and any values specific
to your connection type (such as a user name and password). Click Advanced
Setup > WAN > Add (or Edit). Use the following screen (and the ones that come
after it) to configure your Internet connection. See
information.
Figure 8 Advanced Setup > WAN > Add
P-663HN-51 User's Guide

Initial Configuration

3
Chapter 5 on page 53 for more
35