Add/Edit Port Triggering Rule - ZyXEL Communications VMG1312-Bx0D User Manual

Table 59 Network Setting > NAT > Port Triggering (continued)
LABEL
Trigger Start
Port
Trigger End
Port
Trigger Proto.
Open Start Port
Open End Port
Open Proto.
Modify

11.4.1 Add/Edit Port Triggering Rule

This screen lets you create new port triggering rules. Click Add new rule in the Port Triggering
screen or click a rule's Edit icon to open the following screen.
Figure 84 Port Triggering: Add/Edit
The following table describes the labels in this screen.
Table 60 Port Triggering: Configuration Add/Edit
LABEL
Active
Service Name
WAN Interface
Trigger Start
Port
Chapter 11 Network Address Translation (NAT)
DESCRIPTION
The trigger port is a port (or a range of ports) that causes (or triggers) the VMG to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
This is the first port number that identifies a service.
This is the last port number that identifies a service.
This is the trigger transport layer protocol.
The open port is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The VMG forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
This is the first port number that identifies a service.
This is the last port number that identifies a service.
This is the open transport layer protocol.
Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
DESCRIPTION
Select to enable or disable this rule.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Select a WAN interface for which you want to configure port triggering rules.
The trigger port is a port (or a range of ports) that causes (or triggers) the VMG to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
VMG1312-Bx0D User's Guide
164