Virtual Server Rule Add - ZyXEL Communications P-663HN-51 User Manual

Chapter 7 Network Address Translation (NAT) Screens

7.3.1 Virtual Server Rule Add

To create a virtual server rule, click Advanced Setup > NAT > Virtual Servers
> Add to open the following screen.
Figure 37 Advanced Setup > NAT > Virtual Servers > Add
The following table describes the fields in this screen.
Table 24 Advanced Setup > NAT > Virtual Servers > Add
LABEL
Server Name
Server IP
Address
Save/Apply
86
DESCRIPTION
Either select a pre-defined service or select Custom Server and enter a
name manually.
Enter the LAN IP address to which the ZyXEL Device should forward the
traffic.
When using a pre-defined service, if you do not want to modify the port
numbers, you can click this button to save the changes and have the
ZyXEL Device start using them.
P-663HN-51 User's Guide