Chapter 3 Initial Configuration
3.2 QoS Configuration
If the ISP gave you QoS settings to use, click Advanced Setup > QoS and
configure the ZyXEL Device to use them. See
If the WAN connection uses VLAN multiplexing, you can apply different QoS
settings to different VLANs within the same WAN connection. If you are not using
VLAN multiplexing, you may need to configure separate WAN connections (using
different PVCs) in order to give different traffic different priorities.
3.3 Changing the Login Password
It is highly recommended that you periodically change the password for accessing
the ZyXEL Device. Click Management > Access Control > Passwords to
display the screen shown next. Use this screen to change the password. See
Section 25.5 on page 195
Figure 9 Management > Access Control > Passwords
36
Chapter 10 on page 103
for details.
for details.
P-663HN-51 User's Guide