Machine Timeouts - Xerox Docucolor 12 System Administrator Manual

1
The Machine Timeouts feature allows you to
change the length of time the printer waits before
entering Power Saver mode, or exiting the Tools
mode. You may also disable or enable a timeout
option through the Timeouts feature screens.
The machine timeouts and settings are described
in Table 1.
2
3
Tools Mode
4
5
6
7
TOOLS MODE

Machine Timeouts

Machine
Description
Timeout
Power This sets the time
Saver from the last job
until the machine
enters power
saver mode.
This sets the time
Timeout from the last
selection until
Tools Mode is
automatically
exited.
Table 1: Machine Timeouts
Setting
15-240
min.
10-60 min.
3–8 DOCUCOLOR 12 PRINTER SYSTEM ADMINISTRATION GUIDE