Xerox Docucolor 12 System Administrator Manual page 56

4 Grasp the Paper Path Module and firmly pull the
module out of the printer until it is fully open.
1
2
5
Locate the Fuser Oil Cartridge in the front of the
Paper Path Module (area D).
6
Lift the Fuser Oil Cartridge straight up off the
module. Hold it steady in this position until any
excess oil has dripped off the cartridge and into
the fuser oil reservoir. Hold a sheet of paper under
the bottle nozzle to catch any drips while removing
the cartridge from the machine.
4
4
5
6
7
MAINTENANCE
Figure 30: Pulling out the Paper Path Module
Figure 31: Removing the old
4–18 DOCUCOLOR 12 PRINTER SYSTEM ADMINISTRATION GUIDE
D
Fuser Oil Cartridge (D)