Supply Replacement; Replacing The Dry Ink Cartridge - Xerox Docucolor 12 System Administrator Manual

Supply Replacement

Replacing the Dry Ink Cartridge

When a message is displayed to replace a Dry Ink
Cartridge, follow the instructions provided here in
addition to those on the labels surrounding the
cartridges and affixed to the printer.
CAUTION: To prevent dry ink spillage, remove the
Dry Ink Cartridge from the printer only when the
"Cartridge is Empty" message appears on the
Touch Screen.
NOTE: The Dry Ink "Please replace dry ink"
message indicates the consumable should be
replaced. When this message is displayed, for a
general office usually less than 1500 prints can be
made prior to replacement. For graphic arts, less
than 1000 prints can be made prior to
replacement.
NOTE: When a Dry Ink low condition is displayed
on the screen, the color that is low will be shown.
If additional Dry Ink low conditions occur, a more
generic message is displayed on the screen and
you will not know which Dry Ink cartridges require
replacement. You must access Administration
mode and select the consumables button to view
the Dry Ink status to verify which Dry Ink
cartridges must be replaced.
DOCUCOLOR 12 PRINTER SYSTEM ADMINISTRATION GUIDE
Figure 2: Add Dry Ink message
4–3
1
2
4 4
5
6
7
MAINTENANCE