Motorola DCH3416 Installation Manual page 61

4 DIAGNOSTICS
Field Description
Content
The content record version number, displayed without leading zeros
Record
Ver.
Encoder Information about the analog encoder for the IEEE-1394 output and recording analog programs
Number
Indicates the encoder number — 1 or 2
Type
Indicates the encoder type — Not Installed, MPEG2, Other, or Unknown
Quality
Indicates the encoder quality setting (video bit rate) for analog services only, which may change at
any time through software:
Drive The drive type — IDE (internal), 1394, USB (external), or NOT AVAILABLE (neither enabled nor
configured)
Record The remaining recording capacity, in bytes
Capacity
Remaining
Number of
The number of internal and external hard drives, up to a maximum of 9
Installed
Drives
Drive
The identification number sequentially assigned to each installed drive and whether the drive is
Internal or External
Model The drive model number assigned at the factory
Number
Device ID A text string of up to 20 characters that identifies the disk drive; "N/A" is displayed if the value is
invalid or cannot be retrieved
Type The drive type — IDE, 1394, USB, or Unkn(own)
Total Size The drive size in decimal GB. (1 decimal GB = 1x109 bytes. For example, 120 decimal GB =
120x109 bytes.)
System, The space used and allocated in MB for each of the internal hard drive's partitions — System,
GPFS, DVR GPFS, DVR Content, and DVR Index (1 binary MB = 220 bytes). "N/A" displays if the value is
Content, invalid or cannot be retrieved.
and DVR
Index
State The hard drive state:
Temp (F)
For an internal hard drive only, its temperature in degrees F
•
LOW1 — 1 Mbps
•
LOW2 — 2 Mbps
•
MEDIUM1 — 3 Mbps
•
MEDIUM2 — 4 Mbps
•
HIGH1 — 5 Mbps
•
HIGH2 — 6 Mbps
•
NOT AVAILABLE — the encoder is not enabled or configured
•
Standby — The hard drive is working normally, but is at rest (the State returns to Active
any time disc access is necessary).
•
Active — The hard drive is accessing data.
•
Failed — The hard drive hardware has failed.
51