Separable Security - Motorola DCH3416 Installation Manual

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD Interface
with the DCH.
Field
CARD Interface
CableCARD ID
Host ID
Data ID
Validation
Pairing Rpt Method
MSO Phone Number
Description
CableCARD Interface is a status indication of the interface between the Host
and CableCARD. It will indicate "Good" if no errors are detected, "Error" if
there is an error establishing the CableCARD interface, or "Unsupported
CARD" if the inserted CableCARD is not an M-CARD.
The unique identifier provided by the CableCARD.
The unique identifier in the Host Device Certificate.
A value generated by the CableCARD for the Pairing report.
•
UKNOWN if a Validation message was not received by the product.
•
VALID or INVALID as set by the Host Validation Message received
from the headend.
•
BINDING if the CableCARD is busy with the binding authentication
process.
•
NOT BOUND if Card validation status is not bound for CableCARD
reasons.
•
HOST CERTIFICATE INVALID if the status is not bound because
the Host Certificate was invalid.
•
HOST SIGN FAILED if status is not bound because of failure to
verify Host's SIGN.
•
AUTH KEY FAILED if status is not bound because of failure to
match AuthKey from the Host Device.
•
FAILED if binding failed for other reasons.
Set to "MMI" or "Reportback" as received by a message from the headed,
or set to 'Unknown' if the headend message was not received.
MSO Phone Number as configured at the headend.
32