Motorola DCH3416 Installation Manual page 67

4 DIAGNOSTICS
Field
MAC Abort
Cntr
Socket Port
State
Description
I dc INIT_WAIT_DC_
OR_C
I L WAIT_LM_ACK
I SO WAIT_SO_ACK
I LA WAIT_LA_OR_S
O
S I INIT_STOPPED
r dc RUN_WAIT_DC_
OR_C
r RUNNING
S RUN_STOPPED
00 INVALID
This counter increments every time the MAC layer reaches the cell abort count limit. It is
reset by the successful upstream transmission of a cell: for example, when the DCH3416
receives an ACK. If the counter reaches the MAC abort count limit, the DCH3416
assumes the MAC layer is unavailable due to noise, congestion, or some other problem.
The DCH3416 stops transmitting data upstream, reports an error to the calling function,
and attempts to re-enter the network using the initialization process. 0000 is displayed as
the default or if the MAC Abort CNTR is not configured or unknown.
The socket mode and activity:
•
UNUSED — The socket is not being used.
•
OPENED — The socket is open.
•
READY — The socket is ready to send or receive.
•
RECEIVING — The socket is receiving data from the application server.
•
SENDING — The socket is sending data to the application server.
•
UNKNOWN — The socket state is invalid or unknown.
The DCH3416 is in the interactive initialization state and
waiting for the default configuration or the contention
channel list messages.
The DCH3416 is in the interactive initialization state and
waiting for Link Management Response ACK for Local
Address Message.
The DCH3416 is in the interactive initialization state and
waiting for a Sign On acknowledgement.
The DCH3416 is in the interactive initialization state and
waiting for Logical Address or Sign On with verification
Frequency message.
The DCH3416 is in the interactive initialization state and the
TransMode has stopped.
The DCH3416 is in the interactive state and waiting for the
default configuration or the contention channel list
messages.
Interactive state is running, sending idle messages, and
waiting for any prepare for poll or MAC messages.
The interactive run state has stopped and DCH3416 is
waiting for status or a transmission control message.
The interactive state is unknown or invalid.
57