Advertisement
Available languages
Available languages
Toselecta pile heightsetting:
Turn off vacuum cleaner. Select a pile height
setting by tilting the cleaner back until front
wheels are lifted slightly off the floor.
Slide the adjustment
lever to the correct
setting.
There are four (4) pile height settings on the
vacuum cleaner. Use the LOW setting for
most low-pile carpets and bare floor
cleaning (with agitator OFF), and the HIGH
setting for high-pile carpets like shag carpet,
scatter rugs, etc. Use the other settings as
needed for carpet heights in between low
and high pile.
Height
Adjustment
Lever
CAUTION
Do not allow vacuum cleaner to
remain in one spot for any length of
time when the agitator is turning.
Damage to carpet may occur.
Crevice
Tool
Telescoping
Dusting
Combination
"Stretch
Hose
Hose
Collar
Identily each of the attachments shown
above.
TO USE ATTACHMENTS:
Remove the lower end of the stretch hose
from the cleaner by grasping the hose col-
lar, twisting and pulling straight out. The
attachments can now be added to the hose.
NOTE: The motor protector may open when
using attachments or when cleaning new
carpet, due to redLv;ed airflow caused by the
attachments
themselves
or by new carpet
lint filling the bag quickly, See the
TROUBLESHOOTING
table.
Electrical Shock And Personal Injury
Hazard
Disconnect
electrical supply before
performing
maintenance
to the unit.
Failure to do so could result in elec-
tric,al shock or personal Injury from
vacuum cleaner suddenly
starting.
Advertisement
