Kenmore 116.34922 Owner's Manual page 10

TO STORE ATTACHMENTS
Remove dusting brush or combination
brush. Snap into appropriate storage location.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the extension wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK position,
Unlock
Locking
Upper
Wand
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com-
pressed wand. Snap into the appropriate
storage location.
Reinsert the hose fully into the opening on
the nozzle body from which it was removed.
Press firmly to assure connection.
!
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage or personal injury
could reaulL
EXTENSION HOSE
Some models include an extra hose which
connects to the stretch hose on the vacuum
for a longer cleaning reach.
Insert the two tabs on the end of the
Unit Hose _ Extension Hose
extension hose into the two "J" shaped slots
on the unit hose and twist to connect.
All attachments and the telescoping wand
can be attached to the open end of the
hose.
When using the stretch hose or with
the extension hose attached, the
vacuum cleaner should be on a solid
surface on the same level or below
the level of the user's feet. DO NOT
use the hoses when the vacuum
cleaner is above the level of the
user's feet.
10