Advertisement
Available languages
Available languages
Review this table to find do-it-yourself
solutions for minor performance
problems. Any other
service needed, should be performed by a Sears or other qualified service agent.
WARNING:
D'_ming
maintenance
to the
_ical
shock or personal
injury.
Vacuum cleaner
won't run.
Poor job of dirt
pick-up.
1. Unplugged at wall outlet.
2. Trippedcircuitbreaker/blown fuse
at household service panel.
3. Thermal protectortdpped.
1. Full or cloggeddustbag.
2. Wrongpile height setting.
3. Worn agitator.
4. Clogged nozzleor bag holder.
5. Clogged hose.
6. Hole in hose.
7.
8.
9,
1. Plug in firmly,selectthe desiredset-
ting on the touch control.
2. Reset circuitbreakeror replacefuse.
Hose not insededfully.
7.
Motorprotectionsystemactivated.
8.
Dirtyfilters,
g.
Wrongpile height setting.
1.
Burned out lightbulb.
1.
Handle in full uprightposition.
1.
AgitatorOverloadtripped.
2.
Thermal protector tripped.
3.
Fullor cloggeddust bag.
1.
Dirtyriflers.
2.
Clogged airflowpassage.
3.
Certain attachmenttools.
4.
Attachmentuse restrictsair flow.
1.
Now carpet fuzz clogged air path.
2.
Dirtyopticcells.
Vacuum cleaner cot In upright
position.
3. Unplugvacuumcleaner,allow to cool
and thermal protectorwill reset itself.
1. Change bag.
2. Adjustsetting.
3. Take to yournearestSears
ServiceCenter.
4. Check CLOG REMOVAL
5. Check for clogs.
6. Taketo yournearestSears
Service Center.
Inserthose fully.
Checkfor clogs.
Changemotorsafety filter and
exhuastfilter.
Vacuum Cleaner picks up
1.
Adjustsetting.
moveable rugs or
pushes too hard.
Light won't work.
1.
Change lightbulb.
Agitator does not turn.
1.
Move handle fromuprightposition.
2.
Reset AgitatorOvadoad.
3.
Unplugvacuumcleaner,allow to cool
andthermal protectorwill reset itself.
Performance Indicator,
1.
Change bag.
some models, Is red.
2
Change motor safety filterand
exhuastfilter.
3.
Clear clogfrom airflowpassage.
4.
This is normal. Ught shouldgo off
when toolis removed.
Air flow restricted
1.
Check ATTACHMENTS.
with attachment use.
Sound changes.
2.
Check CLOG REMOVALand clean
hose.
Dirt Sensor, soma
1.
1. Clean opticcalls.
models, wig not work.
Difficulty adjusting pile
1.
1. Tilt vacuumcleaner to upright
height setting
position.
19
i
Advertisement
