Kenmore 116.34922 Owner's Manual page 5

Please pay special attention to these hazard alert boxes, and follow any instruct onsl
'_ given. WARNING statements alert you to such dangers as fire electric shock, burns I
and personal injury. CAUTION statements alert you to such dangerous personal
injury and/or property damage.
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
trical shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate REPAIR PARTS UST. Use
this list to verify that you have received all
the components of your new Kenmore vacu-
um cleaner.
Attach stretch
hose end to
nozzle, as
shown
Hose
End
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum cleaner.
Screw
Position the handle as shown in the illustra-
tion above right.
Slide the handle into the opening at the top
of the vacuum cleaner.
Handle
Screw
Hole
Insert the screw so it passes through the
handle into the vacuum cleaner.
Begin to tighten
the screwwith
your fingers. It
may be neces-
sary to adjust
the handle
slightly.
Usinga screwdriver, tighten the screw.
Do not over tighten.
Over tightening could strip the
screw hole.
Do not operate the vacuum cleaner
without the screw In place.