Table of Contents
Advertisement
Available languages
Available languages
Review this chart to find do-it-yourself
solutions
for minor performance
problems. Any service
needed, other than those described
in this owner's manual,
should be performed by a Sears
authorized
service representative.
WARNING
Electrical Shock Hazard
Disconnect electrical supplybefore servicing or cleaning the unit. Falure to do
so could result in electricalshock or personal Injury,
._
• .
•.
Cleaner won't run.
PoorJob otdirtpick-up.
1, Unpluggedat wall _Jlet.
2. Trippedcircuit breakerfolown fuse
at household servicepanel.
3, On/off swttch not turned on.
4. Thermal protector tripped.
2.
3.
4,
5.
6,
7,
&
9.
f0.
1. Pluglo firmly, pushon/offswitchtoon.
2. Resetcimuit b reaker orreplacefuse.
3. Push onloff switchto on.
4. Reset thermal protector.
1. Clean dust_n.
2. Adjust setting.
Replace agitator.
Check CLOG REMOVAL
Check forclogs.
Replace hose.
Replace/fix bert.
Insert hose tully.
Check for clogs.
CteaNchange fitters.
Ful or clnggeddust bin.
Wrong pile height setting.
Worn agitator.
3.
Ctogged nozzte or dust bin port.
4.
Clogged hose.
5.
Hole in hose•
8.
Broken/misptaced belt.
7.
Hose not inserted lully.
8.
Motor protectionsystemactivated•
9.
Dirtyfitters.
10.
Wrong pile height setting.
I.
Burned out light bulb•
1.
Brokenbelt•
1,
Bare floor selectorin bare
2.
floor setting.
Bett instaled _ncorrecly,
3.
Attachment use restrictsair flow.
1.
New carpet fuzz cloggedair path.
2.
Belt rubbing on carpet/bare floor
1,
selector shaft.
Cleaner picksup
f.
Adjust setting.
moveal_e rugs or
xlshe6 too hard,
Ught won't work,
1.
Change light bulb,
Agitatordoes not turn.
1.
Rep|acs belt.
2.
Move selector to the carpet setting.
3.
Check BELT CHANGING AND
AGITATOR CLEANING.
Air flow rastdoted
1,
Check ATTACHMENTS.
wi_ attachmentuse.
2.
Check CLOG REMOVAL andclean
Sound ch_u_gss,
hose.
_e
noiseas
1.
Push selector all the way forward.
vacuum la shut off.
23
Advertisement
Table of Contents
