Clog Removal - Kenmore COIZDMWOOU00 - KC01ZDMWZOUO Use & Care Manual

CLOG REMOVAL
NOZZLE
Always follow all safety precautions when
performing maintenance to the vacuum
cleaner,
_WARNING
Eleclrica! Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
the vacuum cleaner suddenly starling.
,HIHIHIILUlII
1, Using a flat screwdriver or small coin pry
gently between the cover and the nozzle to
access the clean-out port.
/ft
Port Cover
2_ Remove any debris or build-up,
3_Reinstallcover° You shouldhear a
noticeable click when the cover snapsinto
place.
DUST CUP
Du_t Cup
Du+mon -- (-_'--_
t. Press the
release button on
the side of the
dust cup,
2, While pressing
the release but-
ton rotate the top
of the dust
cup
counterclockwise,
3_ Liftoff dust
cup lid.
4, Remove clog_
To Replace:
1. Align the slot on the dust cup lid with the
short slot on the dust cup.
2. Rotate dust cup tfd clockwise until it
locks in place, The slot on the dust cup lid
should align with the long slot on the dust
cup,
22