Kenmore Automatic washers Owner's Manual And Installation Instructions page 20

'8318179ENv06 3/21/00 2:17 PM Paae 20
REVIEW INSTALLATION
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer,
[ Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
[ Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
cotter pins.
• Installed all parts listed on pages
7-9.
[ Check that:
•The washer is level.
•The nuts on the front legs are tight.
[ Check that the water faucets are
turned on.
FINAL STEPS
I Plug into a grounded 3 prong outlet.
V Remove the blue protective film on the
console and any tape remaining on
washer.
[ Take a few minutes and read the
"OPERATING YOUR WASHER"
section to fully understand your new
washer. Then, start the washer and
allow it to complete the REGULAR
Cycle.
2O