Tr-069 Device Management - Yealink SIP-T2xP Administration Manual

Administrator's Guide for SIP-T2xP IP Phones
TR-069 (Technical Report 069) is a DSL Forum (which was later renamed as Broadband
Forum) technical specification entitled CPE WAN Management Protocol (CWMP). It
defines an application layer protocol for remote management of end-user devices. It
provides the communication between Customer-premises Equipment (CPE) and Auto
Configuration Server (ACS). TR-069 uses common transport mechanisms (HTTP and
HTTPS) for communication with CPE. The HTTP(S) messages contain XML-RPC methods
defined in the standard for configuration and management of the device.
Note
The TR-069 feature is only applicable to some specially designated firmware.
The TR-069 is intended to support a variety of functionalities to manage a collection of
CPEs, including the following primary capabilities:
Auto-configuration and dynamic service provisioning

Software or firmware image management

Status and performance monitoring

Diagnostics

The following table lists the RPC (Remote Procedure Call) methods required for the IP
phone:
RPC Method
GetRPCMethods
SetParameterValues
GetParameterValues
GetParameterNames
GetParameterAttributes
SetParameterAttributes
Reboot
Download
72
Description
This method is used to discover the set of methods
supported by the CPE.
This method is used to modify the value of one or more
CPE parameters.
This method is used to obtain the value of one or more
CPE parameters.
This method is used to discover the parameters
accessible on a particular CPE.
This method is used to read the attributes associated
with one or more CPE parameters.
This method is used to modify attributes associated
with one or more CPE parameters.
This method causes the CPE to reboot.
This method is used to cause the CPE to download a
specified file from the designated location.
File type supported by the Yealink IP phones are: