Shared Call Appearance - Yealink SIP-T2xP Administration Manual

Administrator's Guide for SIP-T2xP IP Phones
Local
The Shared Call Appearance (SCA) feature allows users to share a SIP line on several IP
phones and also provides status monitoring of the shared line. When a user places an
outgoing call using such a shared line, all members sharing that line are notified of this
usage. LEDs available on the IP phones indicate the status of the shared line. Incoming
calls to this line will cause all phones that share this line to ring simultaneously. The
incoming call can be answered on one of the IP phones but not all of them. A SCA user
can retrieve a call being put on public hold on the shared line. If the SCA bridging is
configured, SCA users can barge in an existing call on the shared line.
The SCA feature is specially designed to support the BroadSoft server. The SCA feature
must be provisioned on the BroadWorks web portal in advance, refer to the document
―Yealink IP Phones Deployment Guide for BroadSoft BroadWorks Environments‖ for
more information. The result of the provisioning will be a primary line with the SCA
activated plus one or more secondary lines that share the primary line, each
58
Web User Interface
BLF Key on page 176.
Configure the IP phone whether
to use visual and audio alert for
BLF .
For more information, refer to
Visual and Audio Alert for BLF
Pickup on page 145.
Configure the BLF List URI and
BLF list pickup and barge in
codes.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=4
Configure the BLF keys.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=21
For more information, refer to
the SIP-T2xP User Guide.
Configure the IP phone whether
to use visual and audio alert for
BLF pickup.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=6