Call Waiting; Call Waiting Tone; To Configure The Call Waiting Via Web User Interface; To Configure The Call Waiting Tone Via Web User Interface - Yealink SIP-T2xP Administration Manual

Administrator's Guide for SIP-T2xP IP Phones
When you are in an active call, the call waiting feature notifies you of the new
incoming call, and presents the incoming call visually on the phone LCD screen. If the
call waiting feature is disabled, the new incoming call will be automatically rejected
by the IP phone with a busy message.
Note
If the call waiting feature is disabled and the IP phone is in an active call, the Missed
Calls list does not get updated with details of incoming calls.

Call Waiting Tone

You can also enable or disable the playing of a short ―Call Waiting Tone" when there is
an incoming call on your IP phone. This feature is enabled by default. If you have Call
Waiting Tone enabled, and a call comes into the IP phone when you are in an active call,
a tone is audible to notify you of that incoming call. The Call Waiting Tone feature works
only if the Call Waiting feature is enabled.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or
locally.
Configuration File
Local

To configure the call waiting via web user interface:

1. Click on Phone->Features->General Information >>.
2. Select the desired value from the pull-down list of Call Waiting.
3. Click Confirm to save the change.

To configure the call waiting tone via web user interface:

1. Click on Phone->Features->Audio Settings>>.
2. Select the desired value from the pull-down list of Call Waiting Tone.
3. Click Confirm to save the change.
34
<y0000000000xx>.cfg
Web User Interface
Configure the call waiting and
call waiting tone features.
For more information, refer to
Waiting on page 115.
Configure the call waiting and
call waiting tone features.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
ConfigManApp.com?Id=6
Call