Action Uri - Yealink SIP-T2xP Administration Manual

Administrator's Guide for SIP-T2xP IP Phones
Variable
key=Reboot
key=AutoP
key=DNDOn
key=DNDOff
Note
The variable does not work with all events. For example, the variable ―
only applicable when the IP phone is during a call.
For security reasons, the IP phone does not receive and handle the HTTP GET request by
default. You need to specify which IP address may send the URI to the IP phone. When
receiving the HTTP GET request from the specified IP address, the phone LCD screen
prompts the message ―Allow Remote Control?‖. You can specify one or more trusted IP
addresses on the IP phone, multiple IP addresses are separated by comma. You can
also configure the IP phone to receive and handle the URI from any IP address.
Procedure
Specify the trusted IP address for Action URI using the configuration files or locally.
Configuration File
Local
To configure the trusted IP address(es) for Action URI via web user interface:
1. Click on Phone->Features->API Security>>.
2. Enter the IP address in the Trusted Action URI Server List field.
Multiple IP addresses are separated by comma.
3. Click Confirm to save the change.
64
Phone Action
Reboot the phone.
Let the phone do auto provisioning.
Activate the DND mode.
Deactivate the DND mode.
<y0000000000xx>.cfg
Web User Interface
key=MUTE
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
For more information, refer to

Action URI

on page 151.
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=6
‖ is