Creating A Replace Rule Template:; Dial Now Template; Creating Dial Plan On - Yealink SIP-T2xP Administration Manual

Administrator's Guide for SIP-T2xP IP Phones

Creating a replace rule template:

1. Using an ASCII editor, create a new file.
2. Type <DialRule> to indicate the start of the replace rule template.
3. Add the following string to the template, each starting on a separate line:
<Data Prefix="" Replace=‖‖ LineID=""/>
Where:
Prefix="" specifies the numbers to be replaced.
Replace=‖‖ specifies the alternate string instead of what the user enters.
LineID="" specifies the desired line(s) for this rule. When leaving it blank, the IP
phone will apply to all lines.
4. When completed, type </DialRule> to indicate the end of the replace rule
template.
5. Save this file to the root directory of the configuration server.
The following is an example of a replace rule template:
<DialRule>
<Data Prefix="1" Replace="05928665234" LineID=""/>
<Data Prefix="2(xx)" Replace="002$1" LineID="0"/>
<Data Prefix="5([6-9])(.)" Replace="3$2" LineID="1,2,3"/>
<Data Prefix="0(.)" Replace="9$1" LineID="2"/>
<Data Prefix="1009" Replace="05921009" LineID="1"/>
</DialRule>
You can create multiple dial-now rules using the dial-now template. After creating the
dial-now template, save the dial-now template to the root directory of the configuration
server and specify the access URL in the configuration files.
When creating a dial-now template, remember the following:
A dial-now template must be in .xml format.

<DialNow> indicates the start of a template and </DialNow> indicates the end of

a template.
At most 20 rules can be added to the IP phone.

The expression syntax in the dial-now rule template is the same as introduced in

the section
Specify the values within double quotes.

When specifying the desired line(s) for the dial-now rule, the valid values are 0 and

84
Creating Dial Plan on page 21.