As-Feature-Event; Shared Call Appearance - Yealink SIP-T2xP Administration Manual

represented by its own unique SIP URI.
Procedure
Register the primary and secondary lines on two IP phones using the configuration files
or locally.
Configuration File
Local
To register the primary and secondary lines via web user interface:
1. Click on Account.
2. Register the line as usual (entering the register name of the primary line in the
Register Name field when registering the secondary line).
3. Click on Advanced>>.
4. Select Broadsoft SCA from the pull-down list of Shared Line.
5. Click Confirm to save the change.
The IP phone supports server-side Do Not Disturb (DND), Call Forward (CFWD) and
Automatic Call Distribution (ACD) features. The as-feature-event feature allows the IP
phone to synchronize the status of the following features with the server:
Do Not Disturb

Call Forwarding Always (CFA)

Call Forwarding Busy (CFB)

Call Forwarding No Answer (CFNA)

ACD

If the as-feature-event feature is enabled, a user changes the status of one of these
features via web portal or feature access code (FAC), the server notifies the phone of
the status change. Conversely, if the user changes the feature status on the IP phone,
the IP phone notifies the server of the status change.
<MAC>.cfg
Web User Interface
Configuring Advanced Features
Configure the shared line on
the IP phone.
For more information, refer to

Shared Call Appearance

page 146.
Configure the shared line on
the IP phone.
Navigate to:
http://<phoneIPAddress>/cgi-bi
n/ConfigManApp.com?Id=4
on
59