Nat Limit Port Range; Nat Limit Port Range Size; Ip Address Dhcp Client-Id; Pppoe Auto-Reconnect - HP MSM7XX Reference Manual

CLI commands
ip nat
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip nat
Enables Network Address Translation.
no ip nat
Disables Network Address Translation.

nat limit port range

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
nat limit port range
Reserves a range of TCP and UDP ports for each user starting at port 5000.
no nat limit port range
Use any port for NAT.
All outgoing traffic for the user is mapped within the range. Applications that set an incoming port
(Active FTP, for example) may choose a port that is outside of the allocated port range. If you
enable this feature you should not assign static NAT mappings in the range 5000 to 32768.

nat limit port range size

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
nat limit port range size <number>
Determine the size of the range to use per user, this will limit the number of user authentication
supported if too high.

ip address dhcp client-id

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip address dhcp client-id <id>
Specifies an ID to identify the service controller to a DHCP server. This parameter is not required
by all ISPs.
no ip address dhcp client-id
Deletes the specified DHCP client id.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.

pppoe auto-reconnect

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
pppoe auto-reconnect
The service controller will automatically attempt to reconnect if the connection is lost.
2-80