View Context; Arping; Enable; Iperf - HP MSM7XX Reference Manual

CLI commands

View context

Path: View
This is the root of the command tree.

arping

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
arping [ -AbDfhqUV] [ -c <count>] [ -w <deadline>] [ -s <source>] -I <interface>
<destination>
Pings a destination on a device interface using ARP packets.

enable

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
enable
Switches to the enable context.

iperf

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
iperf -c host [-t time]
Runs a performance throughput test.
Parameters
<-c host>
<-t length>

nslookup

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
nslookup [ -option authentication ] [ <host-to-find> | - [< server> ]]
Queries DNS servers for information on hosts or domains.
ping
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ping <host> [-c <count>] [-s <length>] [-q]
Determines if the specified remote IP address is active.
Parameters
<-c host>
<-c count>
<-s length>
<-q>
2-2
The IP address or DNS name of the iperf server to connect to.
Length of the throughput test in seconds.
The IP address or DNS name of the host to ping.
Number of pings.
Length of the ping datagram.
Quiet mode. No output.