Snmp-Server Readwrite; Snmp-Server Trap; Snmp-Server Trap Community; Snmp-Server Trap Destination - HP MSM7XX Reference Manual

snmp-server readwrite

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server readwrite <community>
Sets the read-write community string.
no snmp-server readwrite
Deletes the read-write community string.

snmp-server trap

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap
Enables support for SNMP traps.
no snmp-server trap
Disables support for SNMP traps.

snmp-server trap community

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap community <str>
Sets the password required by the remote host that will receive the trap.
no snmp-server trap community
Deletes the password required by the remote host that will receive the trap.

snmp-server trap destination

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap destination <host> <[port number]>
Add a new trap destination.
no snmp-server trap destination <host> [<port>]
Deletes the specified trap destination.
Parameters
Sets the IP address or domain name of the host that the service controller
<host>
will send traps to.
SNMP port number. Range 1 - 65535. By default port 162 is used
<[port number]>

snmp-server trap heartbeat

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap heartbeat
Enables sending of heartbeat traps at regular intervals.
no snmp-server trap heartbeat
Disables sending of heartbeat traps at regular intervals.
CLI commands
2-25