Syslog Destination Context; Active; Logging Facility; Logging Host - HP MSM7XX Reference Manual

CLI commands

Syslog destination context

Path: View > Enable > Config > Syslog destination
This context provides commands for configuring Syslog destinations.

active

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
active
Enables logging to the current destination.
no active
Disables logging to the current destination.

logging facility

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
logging facility (local0 | local1 | local2 | local3 | local4 | local5 | local6 |
local7)
Sets the facility that is used when logging messages to a syslog server.
Parameters
Available facilities are: local0 - local7.
<facility>

logging host

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
logging host (tcp | udp) <addr> [<number>]
Sets the remote address, the connection protocol and port of current syslog remote destination.

logging prefix

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
logging prefix <string>
Sets the prefix that will be prepended to all syslog messages.
no logging prefix
Removes the prefix that is prepended to all syslog messages.

name

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
name <name>
Renames the current syslog destination.
2-115