Wireless Filters Type - HP MSM7XX Reference Manual

wireless filters type

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wireless filters type (mac | gateway | rules)
Sets the type of wireless security filter to use.
Parameters
Traffic is forwarded to an upstream device with a specific MAC address.
mac
Wireless security filters use the default definitions.
Traffic is forwarded to the default gateway assigned to the service
gateway
controller. Wireless security filters use the default definitions.
Lets you define custom security filters and address for the upstream
custom
device.
Description
The service controller features an intelligent bridge which can apply security filters to safeguard
the flow of wireless traffic. The filters limit both incoming and outgoing traffic as defined below,
and force the service controller to exchange traffic with a specific upstream device. If the service
controller is configured to use the services of a access controller, then the default security filters
are automatically enabled and all traffic is sent to the access controller.
Default filters for incoming wireless traffic
Applies to traffic sent from wireless client stations to the AP.
Accepted
„
Any IP traffic addressed to the access controller.
„ PPPoE traffic (The PPPoe server must be the upstream device.)
„ IP broadcast packets, except NetBIOS
„
Certain address management protocols (ARP, DHCP) regardless of their source address.
„ Any traffic addressed to the AP, including 802.1x.
Blocked
„
All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination
address. TTPS traffic not addressed to the AP (or upstream device) is also blocked, which
means wireless client stations cannot access the management tool on other products.
Default filters for outgoing wireless traffic
Applies to traffic sent from the AP to wireless client stations.
Accepted
„
Any IP traffic coming from the upstream device, except NetBIOS packets.
„ PPPoE traffic from the upstream device.
„
IP broadcast packets, except NetBIOS
„ ARP and DHCP Offer and ACK packets.
„ Any traffic coming from the AP itself, including 802.1x.
Blocked
„
All other traffic is blocked. This includes NetBIOS traffic regardless of its source/destination
address.
CLI commands
2-93