Card General - Cisco MGX 8220 Installation And Configuration Manual

FRSM-4T1 Specification
Statistics:
Diagnostics:

Card General

Indicators:
•
•
Cisco MGX 8220 Installation and Configuration
B-12
Per Card:
Lines (one per):
Number of frames transmitted with DE set
Number of frames discarded due to reassembly error (S)
Number of frames transmitted during LMI logical port alarm
Number of frames transmitted with FECN set
Number of frames transmitted with BECN set
Number of transmit frames discarded
Number of transmit bytes discarded
Number of transmit frames discarded due to: CRC error (S)
• egress Q depth exceeded
egress DE threshold exceeded source abort
•
physical link failure (T1)
•
ATM cells—Number of cells transmitted to BNM
Number of cells transmitted with CLP bit set
Number of OAM AIS cells transmitted
Number of OAM FERF cells transmitted
Number of BCM cells transmitted
Number of OAM end-end loopback cells transmitted
Number of OAM segment loopback cells transmitted
Number of cells received from BNM
Number of cells received with CLP bit set
Number of OAM AIS cells received
Number of OAM FERF cells received
Number of BCM cells received
Number of OAM end-end loopback cells received
Number of OAM segment loopback cells received
Number of OAM cells discarded due to CRC-10 error (S)
All previous counters followed by an (S) can be configured as
statistics
Last unknown LCN received cells with unknown LCN count
Active (green), standby (yellow), fail (red)
Active and okay (green)
Active and local alarm (red)
Active and remote alarm (yellow)
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Appendix B Specifications