Chapter 5 Service Configuration; Setting Up A Frame Relay Connection; Via Cisco Wan Manager; Figure - Cisco MGX 8220 Installation And Configuration Manual

Service Configuration

Setting up a Frame Relay Connection

A Frame Relay connection can be setup either from Cisco WAN Manager (CWM) or via the MGX 8220
command line interface.

Via Cisco WAN Manager

Setting up a Frame Relay connection is normally performed from CWM using the Connection Manager
graphical user interface (GUI). An example of the CWM screen used for making an MGX 8220 Frame
Relay connection is shown in Figure 5-1. For full details of how to set up a connection, refer to the Cisco
WAN Manager Operations Guide.
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
C H A P T E R
Cisco MGX 8220 Installation and Configuration
5
5-1