Routing Data Cables; Figure 7-19 Routing Power Cables At The Cooling Assembly; Figure 7-20 Routing Data Cables At The Cooling Assembly - Cisco MGX 8220 Installation And Configuration Manual

Chapter

Figure 7-19 Routing Power Cables at the Cooling Assembly

Power cable to MGX 8220

Routing Data Cables

Data cables that are connected to the MGX 8220 shelf back cards are routed up or down the cable
management panel, where they are fed through the fingers and routed to the left or right side of the rack.
The cables can then be routed to the appropriate equipment (for example a router). (See Figure 7-20.)

Figure 7-20 Routing Data Cables at the Cooling Assembly

Data cable from MGX 8220
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Cooling
assembly
power entry module
Cooling
assembly
to T1, E1, or T3 line
P1
Power cable
from MGX 8220
P2
to cooling assembly
Cisco MGX 8220 Installation and Configuration
Cable Routing
MGX 8220 shelf
MGX 8220
shelf
7-25