Ausm Log Codes; Table 8-6 Ausm Log Codes - Cisco MGX 8220 Installation And Configuration Manual

Log Codes
Table 8-5
Error Number
5040
5041

AUSM Log Codes

Table 8-6
Error Number
6001
6002
6003
6004
6005
6019
6021
6022
6023
6024
6025
6026
6027
6050
6051
6052
6053
Cisco MGX 8220 Installation and Configuration
8-16
SRM Log Codes (continued)
Display Log String
Fail to get an SRM Image
from GRAM
Fail to download I-Cube
Image
AUSM Log Codes
Display Log String
Hardware Error
Message Rx Error
Message Tx Error
Other OS Error
Unknown Message
Received
Error in Getting Semaphore Error while trying to get semaphore. The semaphore
Backcard Missing
Unknown Backcard Type
Mismatch Backcard
AUSM going active
AUSM going to standby
Backcard is removed
Backcard is inserted
(causing a reset)
Channel in alarm
Channel out of alarm
Port out of alarm
Port in alarm
Detail Description
Failed to download the SRM image from the GRAM.
Failed to download the I-Cube image.
Detail Description
Hardware errors that were encountered by the card.
Message sent by the ASC to the SM is not a data
frame. SM is expecting an auto card Request.
Error while trying to respond to ASC auto card
request.
Error when OS calls fail. Specific area of failure is
displayed.
Card manager received an unknown message. The
message that is expected is displayed.
details are displayed.
Backcard was missing when the card came up.
AUSM is unable to recognize back card.
This is not the correct back card for this AUSM card.
AUSM card becoming active.
AUSM card going to standby.
Backcard was removed.
Backcard was inserted or already present.
Channel has gone into an alarm. The channel number
is displayed.
Channel has come out of an alarm. The channel
number is displayed.
Port has come out of an alarm. The port number is
displayed.
Port has gone into an alarm. The port number is
displayed.
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter