Init Display First; Reset Configuration Data; Resources Controlled By; Maximum Payload Size - Intel IB935 User Manual

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
PNP OS Installed

Init Display First

Reset Configuration Data

Resources Controlled By

IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
**PCI Express relative items**

Maximum Payload Size

PNP OS Installed
Enable the PNP OS Install option if it is supported by the
operating system installed. The default value is No.
Init Display First
The default setting is PCI Card.
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP operating system such as
Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 128.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
No
PCI Slot
Disabled
Auto (ESCD)
Press Enter
Press Enter
Disabled
128
IB935 User's Manual
BIOS SETUP
ITEM HELP
Menu Level >
41