Advanced Bios Features; Cpu Feature; Hard Disk Boot Priority; Quick Power On Self Test - Intel IB935 User Manual

Advanced BIOS Features

This section allows you to configure and improve your system and
allows you to set up some system features according to your preference.

CPU Feature

Hark Disk Boot Priority
Virus Warming
CPU L3 Cache

Quick Power On Self Test

First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control for OS
OS Select For DRAM>64MB
Report No FDD For WIN 95
Small Logo (EPA) Show
CPU Feature
Press Enter to configure the settings relevant to CPU Feature.

Hard Disk Boot Priority

Press Enter to configure the settings.
Virus Warming
If this option is enabled, an alarm message will be displayed when trying
to write on the boot sector or on the partition table on the disk, which is
typical of the virus.
CPU L3 Cache
Cache memory is additional memory much faster than conventional
DRAM (system memory). CPUs from 486-type on up contain internal
cache memory, and most, but not all, modern PCs have additional
(external) cache memory. When the CPU requests data, the system
transfers the requested data from the main DRAM into cache memory,
for even faster access by the CPU. By default, these items are enabled.
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after
the system is turned on. If it is set to Enabled, BIOS will skip some
items.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Press Enter
Press Enter
Disabled
Enabled
Enabled
CDROM
Legacy LAN
Hard Disk
Enabled
Disabled
Disabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
No
Disabled
IB935 User's Manual
BIOS SETUP
ITEM HELP
Menu Level >
29