Download  Print this page

Setting A Silent Control Panel; Setting The Minute Timer; Changing Between Continuous Bake Or 12-Hour; Energy Saving Features - Frigidaire Electric Range Use & Care Manual

Hide thumbs



Setting a silent control panel

When choosing a function, a tone will be heard each time a
keypad is pressed. If desired, the control can be
programmed for silent operation.
To block the controls from sounding when any keypad is
pressed in the future, press and hold start time keypad for
6 seconds. The control will beep once then release the
To return the tones, press and hold start time again for 6
seconds until the control beeps once.

Setting the minute timer

1. Press timer on-off.
2. Press the
to increase the time in one minute
increments. Press and hold the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
Note: If the
pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until timer on-off is pressed.
To change the timer while it is in use
While the timer is active and shows in the display, press
and hold the
To cancel the minute timer before the set time has
run out
Press timer on-off once .
to increase the
to increase or decrease the time
• The indicator light located above the timer on-off pad
will glow while the minute timer is active.
• The minute timer will display hours and minutes until 1
hour remains on the timer. Once less than 1 hour
remains, the display will count down in minutes and
seconds. Once the timer has less than 1 minute
remaining only seconds will display.
• The minute timer will not start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using any of the other
oven features. If another feature is active when the
minute timer is active, the minute timer will show in the
display. To view information about other active
features, press the pad for that feature.
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the oven is left on for
more than 12 hours. The oven control can be programmed
to override this feature for continuous baking.
Changing to continuous bake setting:
1. Press and hold timer on-off down for 6 seconds until
a tone sounds. " — — hr" will appear in display for
continuous cooking. The current time of day will return
to the display.
2. To cancel the continuous bake setting, press timer
on-off and hold for 6 seconds until a tone sounds.
"12hr" will appear in display indicating that the control
has returned to the 12-Hour Energy Saving feature.
This feature does not change how the cooktop controls

Hide quick links: