Setting Oven Controls; Setting The Clock; Changing Temperature Display (F° Or C°); Setting Silent Control Panel - Frigidaire FFGF3024SS Use & Care Manual

Setting the clock

When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock
1. Press clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
NOTE
The clock cannot be changed when the oven is set or
clean is active.
Changing the temperature display mode
(°F or °C)
The display may be changed to show or Fahrenheit or
Celsius oven temperatures.The oven control is set to display
°F (Fahrenheit) when shipped from the factory.
NOTE
The temperature display mode cannot be changed when
or until
the oven is set or clean is active.
To change the temperature display mode from °F to
°C (Celsius) or from °C to °F (Fahrenheit)
1. Press broil. "— —" appears in the display.
2. Press and hold the
display.
3. Press and hold broil until °F or °C appears in the
display.
4. Press the
5. Press any control pad to return to normal operating
mode.
Setting a silent control panel
When choosing a function, a tone will be heard each time a
keypad is pressed. If desired, the control can be
programmed for silent operation.
To block the controls from sounding when any keypad is
pressed in the future, press and hold start time keypad for
6 seconds. The control will beep once then release the
keypad.
To return the tones, press and hold start time again for 6
seconds until the control beeps once.

SETTING OVEN CONTROLS

until "HI" appears in the
or to change °F to °C or °C to °F.
11