Record in the space provided below the model and serial numbers. The serial Frigidaire Home Products. number is found on the right side of the oven front frame for models equipped with sealed surface burners. Versibn...
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. This guide contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. Here is a brief explanation of the use of these symbols.
Page 4
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR • Placement of Oven Racks. Always place oven racks in desired location while oven is cool. If rack must be moved while oven is COOKTOP hot use extreme caution. Use potholders and grasp the rack with both hands to reposition.
Grounding Instructions See the INSTALLATION INSTRUCTIONS packaged with this range (electric ignition models only) for complete installation and grounding instructions. Avoid fire hazard or electrical shock. Do not use Grounding type wall receptacle an adapter plug, an extension cord, or remove grounding prong from electrical power cord.
Sealed Surface Burner Your range may be equipped with any combination of the following burners: Simmer Burner, this burner is best used for simmering delicate sauces, etc. Models - Setting Standard Burner, can be used for most all surface cooking needs. Large Burner, the larger burner is best used when bringing large quantities Surface Controls liquid to temperature...
Oven Vent Location Before Setting Oven The oven vent is located below the backguard. When the oven is on, warm Controls air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results. Vent OVEN VENT Arranging...
Your model may be equipped with the clock shown below. Follow the Setting Clock and instructions to set the clock and minute timer on your range. Not all manual Minute Timer clean ranges are equipped with a clock. (some models) To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted,...
Bake and Broil Bake Arrange oven racks while the oven is still cool. See "Arranging Oven Racks" under Before Setting Oven Controls. Push in and turn the Temperature Control knob counterclockwise to the The oven control shown below may desired temperature. not look identical to the oven control Preheat the oven for 10 to 12 minutes before baking.
Porcelain Enamel Oven Broiler Drawer area Oven Cleaning Porcelain has a smooth finish and is a type of glass fused to metal. Oven cleaners can be used on all interior oven surfaces. General Cleaning Remove soils using hot, soapy water. Do not allow food spills with a high sugar Follow these cleaning precautions: or acid content (such as milk, tomatoes, saukerkraut, fruit juices or pie filling)
General Cleaning Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is cool. Remove spillovers and heavy soiling as soon as possible. Regular deanings will reduce the effort required for major cleanings later. Surfaces How to Clean Aluminum...
Page 12
Turn the burner on to determine if it will light. If the burner does not light appliance to satisfactorily meet the after cleaning, contact an authorized servicer. Do not service the sealed application needs must be made by an burner yourself. authorized Frigidaire Distributor Qualified Agency.
General Cleaning To Remove Replace Oven Bottom To Remove Oven Bottom: Remove the oven racks. Figure 1 Remove the two hold-down screws (Figure 1) at the rear of the oven bottom panel. If the screws are too tight to remove by hand, use a screwdriver.
Changing Cooktop Be sure the range is unplugged and all parts are COOL before replacing the surface or oven lights. Wear a leather-faced glove for protection and/or Oven Lights against possible broken glass. (if equipped) To Change the Oven Light (some manual clean models) On some models, the oven light automatically...
Page 15
Surface burner flame burns half Burner ports are clogged. With the burner off, clean ports by using a small-gauge wire around, or needle. Moisture is present after cleaning. Lightly fan the flame and allow burner to operate until flame is full. Dry the burners thoroughly following instructions in the General Cleaning section.
GIBSON RANGE PLATINUM ADVANTAGE WARRANTY Your Gibson range is protected by this warranty WARRANTY THROUGHOUR AUTHORIZED SERVICERS, THE CONSUMERWILL BE RESPONSIBLEFOR: PERIOD WE WILL: FULLTWO-YEAR Twoyears from originalPayall costsfor repairing or replacing any partsof this Costsof servicecallsthat are listedunderNORMAL WARRANTY )urchasedate.