Setting Oven Controls; Setting The Clock; Changing Oven Temperature Display (F° Or C°); Setting A Silent Control Panel - Frigidaire LFEF3016NW Use & Care Manual

Hide thumbs

Table of Contents

Setting the clock

When the appliance is first plugged in or when the power

supply to the appliance has been interrupted, the display

will flash "12:00". It is recommended to always set the

clock for the correct time of day before using the appliance.

To set the clock:

1. Press clock once (do not hold key pad down).

2. Within 5 seconds, press and hold the

the correct time of day appears in the display.

NOTE

The clock cannot be changed when the oven is set for

cooking or clean is active.

Changing temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit)

when shipped from the factory. The oven may be

programmed for any temperature from 170°F to 550°F

(77°C to 287°C).

NOTE

The temperature display feature cannot be changed

until

when the oven is set for cooking or clean is active.

To change the temperature to display °C (Celsius) or

from °C to °F:

1. Press broil. "— —" appears in the display.

2. Press and hold the

display.

3. Press and hold broil until °F or °C appears in the

display.

4. Press the

5. Press any control pad to return to normal operating

mode.

Setting a silent control panel

When choosing a function, a tone will be heard each time a

keypad is pressed. If desired, the control can be

programmed for silent operation.

To block the controls from sounding when any keypad is

pressed in the future, press and hold start time keypad for

6 seconds. The control will beep once then release the

keypad.

To return the tones, press and hold start time again for 6

seconds until the control beeps once.