Table of Contents
Advertisement
6. SYMPTOM:
THE WALKING
BELT IS OFF-CENTER
OR SLIPS
WHEN
WALKED
ON
a.
b.
c.
If the walking belt hasshifted
to the-left, first remove the
safety key from the console and UNPLUG
THE POWER
CORD.
With the allen wrench included, turn the left rear
roller adjustment
bolt clockwise, and the right bolt coun-
terclockwise,
1/4 of a turn each.
Plug in the power cord
and reinsert the safety key. Run the treadmill for a cou-
ple of minutes. Repeat as necessary
until the walking
belt is centered.
If the walking belt has shifted to the right, first remove the
safety key from the console and UNPLUG
THE POWER
CORD.
With the allen wrench included, turn the left rear
roller adjustment
bolt counterclockwise,
and the right bolt
clockwise,
114 of a turn each.
Plug in the power cord
and reinsert the safety key. Run the treadmill for a cou-
ple of minutes. Repeat as necessary
until the walking
belt is centered.
If the walking belt slips when walked on, first remove
the
safety key from the console and UNPLUG
THE POWER
CORD.
With the allen wrench included, turn both rear
roller adjustment bolts clockwise, 114 of a turn.
Plug in
the power cord and reinsert the safety key. Run the
treadmill for a couple of minutes.
Repeat as necessary
until the tension of the walking belt is correct.
When the
a.
I
9
I
9
,i
W
_IE'-"
I1€--
tension
is correct,
you should
be able to lift each side of the walking belt 3-4 inches off the walk-
ing platform.
The center
of the walking
belt should
remain just at the surface
of the walking
plat-
form.
Be careful to keep the walking
belt centered
on the walking
platform.
7. SYMPTOM:
THE CUSHION
SPRING/FOOT
HITS THE FRAME
a.
If the cushion
spring/foot
hits the bottom
of the frame when
you run, the cushion
spring/foot
should
be adjusted.
UNPLUG
THE POWER
CORD.
With the help of second
person,
raise the back end of the treadmill
and stand it on
the front end.
Remove
the two nuts (36) from the right
cushion
spring/foot
(60). Insert the two cushion
spring
bolts (59) through
the two holes closest to the foot.
Reattach
the cushion
spring/foot
with the ,_'o nuts,
Adjust
the te|t cushion
spring/foot
(not shown)
in the same man-
ner. This adjustment
wil! give the treadmill
a more firm
cushion
as you run.
STORAGE
12
Unplug the power cord when the treadmill
is not in use.
Remove
the bolts and washers
from the lower end of the handrails.
Keep
the bolts and washers
in a secure location.
Carefully
lay the
handrails
and console
on the treadmill.
Be careful
not to pinch
the wires in the handrail.
The allen wrench can be stored con-
veniently by removing the backing from the wrench clip and
pressing it onto one of the endcaps.
Hide quick links:
Advertisement
Table of Contents
